Single Reservoir

This section documents the ReservoirModel class, which can be used to model a single reservoir. An overview of the methods of ReservoirModel, including all the schemes to control the reservoir flow is given in Reservoir API. Details of the Modelica file used by ReservoirModel can be found in Single Reservoir Model. We encourage users to first look at Single Reservoir Examples before looking at the details of ReservoirModel in this section.

Contents:

• Reservoir API
  • InputVar
    • InputVar.H_OBSERVED
    • InputVar.Q_EVAP
    • InputVar.Q_IN
    • InputVar.Q_OUT
    • InputVar.Q_RAIN
    • InputVar.Q_SLUICE
    • InputVar.Q_TURBINE
  • OutputVar
    • OutputVar.HEIGHT
    • OutputVar.Q_EVAP
    • OutputVar.Q_OUT
    • OutputVar.Q_RAIN
    • OutputVar.Q_SPILL
    • OutputVar.VOLUME
  • QOutControlVar
  • ReservoirModel
    • ReservoirModel.adjust_rulecurve()
    • ReservoirModel.apply_adjust()
    • ReservoirModel.apply_fillspill()
    • ReservoirModel.apply_minq()
    • ReservoirModel.apply_passflow()
    • ReservoirModel.apply_poolq()
    • ReservoirModel.apply_rulecurve()
    • ReservoirModel.apply_spillway()
    • ReservoirModel.calculate_cumulative_inflows()
    • ReservoirModel.calculate_output_variables()
    • ReservoirModel.calculate_rule_curve_deviation()
    • ReservoirModel.calculate_single_cumulative_inflow()
    • ReservoirModel.find_maxq()
    • ReservoirModel.get_current_datetime()
    • ReservoirModel.get_current_time()
    • ReservoirModel.get_flood_flag()
    • ReservoirModel.get_output_variables()
    • ReservoirModel.get_var()
    • ReservoirModel.include_evaporation()
    • ReservoirModel.include_rain()
    • ReservoirModel.include_rainevap()
    • ReservoirModel.pre()
    • ReservoirModel.set_q()
• Single Reservoir Model
  • Inputs
  • Outputs
  • Parameters
  • Units
  • The Modelica model